Без рубрики

Studica Toolkit Documentation

On this page, the community maintains up-to-date information about LabVIEW Studica Toolkit.

Studica Toolkit is distributed free of charge as a VI Package file with the *.vip extension. You can install the VI Package using the VI Package Manager.

Studica Toolkit

Studica Toolkit 2 and 3 versions use the standard FPGA firmware, which is used in myRIO Toolkit. In other words, Studica Toolkit 2 or 3 versions within themselves have VIs from the myRIO Toolkit palette. Studica Toolkit 4 version uses its own FPGA firmware, which replaces the FPGA firmware that was used in myRIO Toolkit.

Studica Toolkit 4.0.0.4 installation

Studica Toolkit 4.0.0.4 requires LabVIEW 2017 or later.

To install Studica Toolkit 4.0.0.4, follow these steps:

  1. Download and unzip the Studica Toolkit 4.0.0.4 archive
  2. Double-click the studica_lib_studica_toolkit-4.0.0.4.vip file. This package should open with VI Package Manager
  3. Click the Install button and follow the installation instructions
  4. The last step of a successful installation should look like this

You should see the Studica Toolkit palette in the VI block diagram (which is located at the myRIO controller level in Project Explorer) after installing it in the LabVIEW development environment with the following contents:

Attachments